# Out of the Crisis

W. Edwards Deming · 1982

Open the original and follow its chapters or sections with this study guide. Reading tasks are editorial assignments. Use the points to consider to examine your interpretation.

## Scope of source verification

Structure checked against: Contents or section structure

The two-page official MIT Press contents verifies chapters 1–18 in order. Chapter 18 is an appendix on transformation in Japan. The chapter bodies have not been checked in full.

- [The MIT Press — official table of contents](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1) — Contents
- [The MIT Press — Out of the Crisis](https://mitpress.mit.edu/9780262350037/out-of-the-crisis/) — Authorized excerpt
- [The W. Edwards Deming Institute — Knowledge of Variation](https://deming.org/knowledge-of-variation/) — Public text

<a id="guide"></a>
## Read the whole work

Whole-work question: What must be investigated to understand quality through customers, processes and management rather than only demands on individuals?

Edition: MIT Press 2018 reissue, ISBN 9780262350037; official contents

Native units: Reading divisions of the text

Form: Argument

Scope and divisions: The contributed 2018 foreword, the author’s preface, author biography, acknowledgments and index are excluded from these reading divisions. The chapter count differs from the 14 management principles. Original division order is preserved. Descriptive labels, parts and learning units are editorial reading aids.

Checked: 2026-11-17

### Reading paths

Short path: [Investigating a chain of quality improvement](#guide-unit-quality-chain) → [Distinguishing definitions, conformity and performance](#guide-unit-definitions-standards) → [Distinguishing stability from acceptable quality](#guide-unit-variation-stability) → [Considering inspection through total costs](#guide-unit-inspection-costs) → [Reading transformation in Japan historically](#guide-unit-historical-return)

Full path: [Investigating a chain of quality improvement](#guide-unit-quality-chain) → [Reading management principles alongside obstacles](#guide-unit-principles-obstacles) → [Organizing questions of time and management](#guide-unit-time-manager-questions) → [Connecting consumers with service work](#guide-unit-consumer-service) → [Considering training and leadership through work conditions](#guide-unit-training-leadership) → [Distinguishing definitions, conformity and performance](#guide-unit-definitions-standards) → [Distinguishing stability from acceptable quality](#guide-unit-variation-stability) → [Comparing improvement examples with disappointing ideas](#guide-unit-improvement-disappointments) → [Reading management decisions through reports](#guide-unit-reports-decisions) → [Considering inspection through total costs](#guide-unit-inspection-costs) → [Extending inquiry to organization and everyday life](#guide-unit-organization-everyday) → [Reading transformation in Japan historically](#guide-unit-historical-return)

### Parts and reading units

<a id="guide-part-management"></a>
#### Reading management transformation as a set of questions

Native range: Chapter 1: Linking quality with productivity — Chapter 5: Questions addressed to managers

Read chapters 1–5 to examine the relationship between quality and management, obstacles to improvement and the time needed for change.

<a id="guide-unit-quality-chain"></a>
##### Investigating a chain of quality improvement

Native range: Chapter 1: Linking quality with productivity · Read

Open chapter 1 and diagram relationships among quality, productivity and cost, separating hypotheses from observations needed.

Question: Which evidence would test an expectation that improved quality reduces cost?

Points to consider:

- Identify concrete work affecting cost, such as rework, waiting or waste.
- Investigate effects on customers and workers as well as quality measures.

Concepts: [System conditions and management responsibility](#guide-concept-system-responsibility)

Reading tasks to check in the original:

- [Chapter 1: Linking quality with productivity](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1) — Open chapter 1 and examine which activities and conditions connect quality with productivity and cost.

<a id="guide-unit-principles-obstacles"></a>
##### Reading management principles alongside obstacles

Native range: Chapter 2: Principles for changing management — Chapter 3: Obstacles to improvement · Read

Read chapters 2–3 and pair management principles with obstacles to their practice rather than turning their wording into slogans.

Question: What would you ask about actual operations when an organization claims to have adopted a principle?

Points to consider:

- Specify whose work would change and how.
- Keep the number of principles separate from the chapter count and compare them with the discussion of obstacles.

Concepts: [Principles for management transformation](#guide-concept-management-principles), [System conditions and management responsibility](#guide-concept-system-responsibility)

Reading tasks to check in the original:

- [Chapter 2: Principles for changing management](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1) — Open chapter 2, choose one of the 14 principles and investigate its implications for management and operating work.
- [Chapter 3: Obstacles to improvement](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1) — Open chapter 3 and look for obstacles that could remain when putting the chosen principle into practice.

<a id="guide-unit-time-manager-questions"></a>
##### Organizing questions of time and management

Native range: Chapter 4: The time required for change — Chapter 5: Questions addressed to managers · Read

Use chapters 4–5 to distinguish starting conditions, observations during change and management questions rather than reducing transformation to a duration.

Question: When improvement is slow, what should management examine besides elapsed time?

Points to consider:

- Separate launched initiatives from changes in actual work or information.
- Record evidence for judging progress together with remaining uncertainties.

Concepts: [Principles for management transformation](#guide-concept-management-principles), [System conditions and management responsibility](#guide-concept-system-responsibility)

Reading tasks to check in the original:

- [Chapter 4: The time required for change](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1) — Open chapter 4 and examine the conditions involved in considering the time needed for change.
- [Chapter 5: Questions addressed to managers](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1) — Open chapter 5, choose a question for managers and list the facts needed to answer it.

<a id="guide-part-customer-work"></a>
#### Returning to customers and actual work

Native range: Chapter 6: Considering quality from the consumer side — Chapter 10: The role of standards and regulations

Use chapters 6–10 to connect consumers, services, training, definitions and standards with questions about observed work.

Depends on: [Reading management transformation as a set of questions](#guide-part-management)

<a id="guide-unit-consumer-service"></a>
##### Connecting consumers with service work

Native range: Chapter 6: Considering quality from the consumer side — Chapter 7: Studying service work · Read

In chapters 6–7, develop questions about user experience and service processes rather than confining quality to product inspection results.

Question: How would you investigate a user’s difficulty beyond simply warning the person involved?

Points to consider:

- Record what was used, when the difficulty arose and the user’s conditions.
- Map the process from intake to outcome and track information and waiting time.

Concepts: [Quality in use](#guide-concept-customer-quality), [System conditions and management responsibility](#guide-concept-system-responsibility)

Reading tasks to check in the original:

- [Chapter 6: Considering quality from the consumer side](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1) — Open chapter 6 and identify information needed to consider quality from the consumer’s perspective.
- [Chapter 7: Studying service work](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1) — Open chapter 7 and develop questions for observing a service as a process, including differences from manufacturing.

<a id="guide-unit-training-leadership"></a>
##### Considering training and leadership through work conditions

Native range: Chapter 8: Training and leadership · Read

Read chapter 8 and examine conditions for learning and performing work before counting instruction sessions or the intensity of warnings.

Question: What else should be investigated when outcomes remain inconsistent after training?

Points to consider:

- Distinguish instruction content, definitions of the task and available tools.
- Separate learning opportunities from process variation and identify conditions leaders can change.

Concepts: [Conditions for learning work](#guide-concept-training), [System conditions and management responsibility](#guide-concept-system-responsibility)

Reading tasks to check in the original:

- [Chapter 8: Training and leadership](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1) — Open chapter 8 and examine training and leadership in relation to the conditions faced by people doing the work.

<a id="guide-unit-definitions-standards"></a>
##### Distinguishing definitions, conformity and performance

Native range: Chapter 9: Definitions and observed performance — Chapter 10: The role of standards and regulations · Close reading

Read chapters 9–10 to check what is actually being measured and compare conformity to standards with performance in use.

Question: What must be aligned when two observers classify the same result differently?

Points to consider:

- Specify the object, procedure and decision criterion.
- Check whether the standard’s conditions correspond to the performance customers need.

Concepts: [Operational definition](#guide-concept-operational-definition), [Quality in use](#guide-concept-customer-quality)

Reading tasks to check in the original:

- [Chapter 9: Definitions and observed performance](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1) — Open chapter 9 and examine how concepts are connected to measurement or classification procedures.
- [Chapter 10: The role of standards and regulations](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1) — Open chapter 10 and distinguish the scope of standards or regulations from quality questions they do not resolve.

<a id="guide-part-variation-decisions"></a>
#### Connecting variation and inspection with decisions

Native range: Chapter 11: Stable processes and variation — Chapter 15: Decisions about inspection cost and loss

In chapters 11–15, distinguish process variation, improvement examples, reports to management and the costs of inspection.

Depends on: [Returning to customers and actual work](#guide-part-customer-work)

<a id="guide-unit-variation-stability"></a>
##### Distinguishing stability from acceptable quality

Native range: Chapter 11: Stable processes and variation · Close reading

In chapter 11, separate acceptable outcomes from types of variation and compare changing a process with investigating a specific departure.

Question: What information would help select a response after one poor result?

Points to consider:

- Examine observations over time and the usual state of the process.
- Distinguish a stable process failing requirements from an unusual change.

Concepts: [Distinguishing causes of variation](#guide-concept-variation), [Process stability](#guide-concept-stability), [Operational definition](#guide-concept-operational-definition)

Reading tasks to check in the original:

- [Chapter 11: Stable processes and variation](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1) — Open chapter 11 and investigate common causes, special causes and process stability through the observation procedures in its charts and examples.

<a id="guide-unit-improvement-disappointments"></a>
##### Comparing improvement examples with disappointing ideas

Native range: Chapter 12: Improvement further along a process — Chapter 13: Disappointments in promising ideas · Read

Use chapters 12–13 to separate an initiative’s appeal from its operation and consider comparable conditions before and after a change.

Question: What needs checking before attributing an apparently improved result to an initiative?

Points to consider:

- Align comparison periods, subjects and measurement definitions.
- Investigate other changes in the process or demand.

Concepts: [Distinguishing causes of variation](#guide-concept-variation), [Operational definition](#guide-concept-operational-definition)

Reading tasks to check in the original:

- [Chapter 12: Improvement further along a process](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1) — Open chapter 12 and identify the work changed in an improvement example. Are measurements from before and after shown? If evidence is missing, what observations would be needed?
- [Chapter 13: Disappointments in promising ideas](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1) — Open chapter 13 and investigate why a promising idea may disappoint, including its implementation conditions.

<a id="guide-unit-reports-decisions"></a>
##### Reading management decisions through reports

Native range: Chapter 14: Reading reports prepared for management · Read

Read the two reports in chapter 14, separating facts, interpretations and proposals and examining what reaches the decision maker.

Question: What further questions should a manager ask after receiving a report?

Points to consider:

- Separate measured outcomes from conjectures about causes.
- Identify additional evidence needed and uncertainties attached to the proposal.

Concepts: [Communication for decisions](#guide-concept-evidence-communication), [Distinguishing causes of variation](#guide-concept-variation)

Reading tasks to check in the original:

- [Chapter 14: Reading reports prepared for management](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1) — Open chapter 14 and examine the reasoning connecting the observations and proposals in each report.

<a id="guide-unit-inspection-costs"></a>
##### Considering inspection through total costs

Native range: Chapter 15: Decisions about inspection cost and loss · Close reading

In chapter 15, investigate inspection cost, missed defects and process conditions instead of choosing simply more or less inspection.

Question: Which conditions should be checked before evaluating a proposal to reduce inspection?

Points to consider:

- Distinguish inspection costs from losses caused by nonconformities proceeding downstream.
- Identify the chapter’s assumptions and settings in which they may not apply.

Concepts: [Total cost](#guide-concept-total-cost), [Process stability](#guide-concept-stability)

Reading tasks to check in the original:

- [Chapter 15: Decisions about inspection cost and loss](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1) — Open chapter 15 and inspect the quantities, assumptions and losses used in its inspection calculations.

<a id="guide-part-organization-history"></a>
#### Reading organization and history for continuing improvement

Native range: Chapter 16: Organizing improvement — Chapter 18: Appendix: transformation in Japan

Read chapters 16–18 to compare organizational arrangements, everyday applications and the historical Japanese context before returning to the whole work.

Depends on: [Connecting variation and inspection with decisions](#guide-part-variation-decisions)

<a id="guide-unit-organization-everyday"></a>
##### Extending inquiry to organization and everyday life

Native range: Chapter 16: Organizing improvement — Chapter 17: Examples involving everyday life · Read

Use chapters 16–17 to examine responsibilities for improvement and retain differences in context and measurement when extending ideas to everyday examples.

Question: What needs to be shared, and with whom, to connect one department’s effort with wider improvement?

Points to consider:

- Connect information spanning processes with authority to make changes.
- Explain similarities and differences when transferring an everyday example to work.

Concepts: [Cooperation across processes](#guide-concept-cooperation), [System conditions and management responsibility](#guide-concept-system-responsibility)

Reading tasks to check in the original:

- [Chapter 16: Organizing improvement](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1) — Open chapter 16 and investigate roles and information flows in organizing improvement.
- [Chapter 17: Examples involving everyday life](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1) — Open chapter 17, choose an everyday improvement example and consider conditions for transferring it to a work process.

<a id="guide-unit-historical-return"></a>
##### Reading transformation in Japan historically

Native range: Chapter 18: Appendix: transformation in Japan · Read

Read the appendix in chapter 18 and revisit the whole work by distinguishing principles from the conditions of a particular historical setting.

Question: What cannot simply be transferred from a historical improvement case to a present organization?

Points to consider:

- Record conditions of period, industry, education and institutions.
- Separate an idea worth considering from questions requiring investigation in the current setting.

Concepts: [Historical context](#guide-concept-historical-context), [Principles for management transformation](#guide-concept-management-principles), [Cooperation across processes](#guide-concept-cooperation)

Reading tasks to check in the original:

- [Chapter 18: Appendix: transformation in Japan](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1) — Open chapter 18 and distinguish management principles from historical conditions in its account of transformation in Japan.

### Key concepts

<a id="guide-concept-system-responsibility"></a>
#### System conditions and management responsibility

Examining work, information, tools and coordination producing outcomes and relating them to responsibility for changing conditions.

First unit: [Investigating a chain of quality improvement](#guide-unit-quality-chain)

<a id="guide-concept-management-principles"></a>
#### Principles for management transformation

Ideas for reconsidering management purposes and practices; adopting their wording differs from changing actual work.

First unit: [Reading management principles alongside obstacles](#guide-unit-principles-obstacles)

<a id="guide-concept-customer-quality"></a>
#### Quality in use

A perspective on whether users obtain the performance they need under particular conditions.

First unit: [Connecting consumers with service work](#guide-unit-consumer-service)

<a id="guide-concept-training"></a>
#### Conditions for learning work

Conditions including instruction, tools, task definitions and opportunities to practice.

First unit: [Considering training and leadership through work conditions](#guide-unit-training-leadership)

<a id="guide-concept-operational-definition"></a>
#### Operational definition

A communicable specification of what is observed, measured or classified and by which procedure and criterion.

First unit: [Distinguishing definitions, conformity and performance](#guide-unit-definitions-standards)

<a id="guide-concept-variation"></a>
#### Distinguishing causes of variation

Investigating causes common to a process separately from unusual causes in order to select an appropriate response.

First unit: [Distinguishing stability from acceptable quality](#guide-unit-variation-stability)

<a id="guide-concept-stability"></a>
#### Process stability

A condition of consistent variation over time, assessed separately from whether outcomes meet requirements.

First unit: [Distinguishing stability from acceptable quality](#guide-unit-variation-stability)

<a id="guide-concept-evidence-communication"></a>
#### Communication for decisions

Communicating observations, interpretations, proposals and uncertainty distinctly to a decision maker.

First unit: [Reading management decisions through reports](#guide-unit-reports-decisions)

<a id="guide-concept-total-cost"></a>
#### Total cost

Cost considered across a stated scope, including consequences such as downstream losses rather than only one activity’s expense.

First unit: [Considering inspection through total costs](#guide-unit-inspection-costs)

<a id="guide-concept-cooperation"></a>
#### Cooperation across processes

Coordinating information and action among different participants toward a shared purpose.

First unit: [Extending inquiry to organization and everyday life](#guide-unit-organization-everyday)

<a id="guide-concept-historical-context"></a>
#### Historical context

The period, industry and institutional conditions of a case, distinguished before considering present application.

First unit: [Reading transformation in Japan historically](#guide-unit-historical-return)

### Misreadings and corrections (editorial examples)

Possible misreading: The book has 14 chapters because it presents 14 principles.

Correction: Open the selected edition’s contents, verify all 18 chapters and distinguish the principle list from the book structure.

Check the passage: [Chapter 2: Principles for changing management](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1)

Possible misreading: Examining the system means never investigating special causes.

Correction: Investigate the type of variation and distinguish changing the whole process from examining an unusual departure.

Check the passage: [Chapter 11: Stable processes and variation](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1)

Possible misreading: A stable process necessarily meets customer requirements.

Correction: Assess stability and requirements separately, including situations where a stable process still needs improvement.

Check the passage: [Chapter 11: Stable processes and variation](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1)

<a id="guide-capstone"></a>
### Capstone

Choose a quality issue in familiar work. Define user needs, operational measures, the process, observations over time and conditions management can change. Compare an inspection-focused proposal with a process-change proposal and discuss limits of historical transfer.

- Are management principles connected with concrete questions about users and work?
- Are variation, conformity to requirements and inspection costs distinguished?
- Does the proposal address cross-process cooperation and historical conditions while stating evidence and uncertainty?

Parts to connect: [Reading management transformation as a set of questions](#guide-part-management), [Returning to customers and actual work](#guide-part-customer-work), [Connecting variation and inspection with decisions](#guide-part-variation-decisions), [Reading organization and history for continuing improvement](#guide-part-organization-history)

<a id="guide-scope"></a>
### Native scope inventory

1. [Chapter 1: Linking quality with productivity](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1)
2. [Chapter 2: Principles for changing management](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1)
3. [Chapter 3: Obstacles to improvement](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1)
4. [Chapter 4: The time required for change](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1)
5. [Chapter 5: Questions addressed to managers](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1)
6. [Chapter 6: Considering quality from the consumer side](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1)
7. [Chapter 7: Studying service work](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1)
8. [Chapter 8: Training and leadership](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1)
9. [Chapter 9: Definitions and observed performance](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1)
10. [Chapter 10: The role of standards and regulations](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1)
11. [Chapter 11: Stable processes and variation](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1)
12. [Chapter 12: Improvement further along a process](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1)
13. [Chapter 13: Disappointments in promising ideas](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1)
14. [Chapter 14: Reading reports prepared for management](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1)
15. [Chapter 15: Decisions about inspection cost and loss](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1)
16. [Chapter 16: Organizing improvement](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1)
17. [Chapter 17: Examples involving everyday life](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1)
18. [Chapter 18: Appendix: transformation in Japan](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1)

### Primary references

- [The MIT Press — official table of contents](https://mitp-content-server.mit.edu/books/content/sectbyfn/books_pres_0/11457/Toc.pdf?dl=1)
- [The MIT Press — Out of the Crisis](https://mitpress.mit.edu/9780262350037/out-of-the-crisis/)
- [The W. Edwards Deming Institute — Knowledge of Variation](https://deming.org/knowledge-of-variation/)


[Return to the learning courses](/en/lab/classics/learn)

[Download Markdown](/classics-data/modern/deming.en.md)
